Specifications - click on part number for datasheet

800-0121 & 800-0140 Model 224 - No longer available
This small, compact, power supply operates from 12V DC at 1A and produces up to 3.26kV at 10mA. Lower load voltages, such as 1.2kV can allow for currents up to 15mA. The standard 224 is intended for use inside a housing, where the threaded bulkhead power connector provides a means of mounting and disconnect. The 224 with a switch is intended for mounting on a bar frame; where the extra length cable, switch, and shrouded power connector can free hang from the sign. The 224 is primarily intended to run  Argon/Mercury loads, but mixed Neon/Argon loads and small pure Neon loads may work acceptably as well (please test!).

800-0151 / 800-0152 (IEC) Model 226H - No longer available
This high voltage power supply is designed to drive small wall mounted Neon signs and medium sized Argon/Mercury signs for a reasonable cost. The unit runs up to 6.4kV at 25mA and has a closed case. The low profile black case optionally allows the power supply to be mounted on the front of the sign under the glass. Everbrite's proprietary anti-bubbling and anti mercury migration waveforms are also included.

800-0153 / 800-0154 (IEC) Model 226D
This high voltage power supply is designed to drive small wall mounted Neon signs and medium sized Argon/Mercury signs for a reasonable cost. In bright setting, the unit runs up to 6.4kV at 25mA and has a closed case. A side mounted recessed slide switch selects full bright or reduced brightness settings. The low profile black case optionally allows the power supply to be mounted on the front of the sign under the glass. Everbrite's proprietary anti-bubbling and anti mercury migration waveforms are also included.

800-0246 / 800-0247 (IEC) Model 3610
This is a 10kV universal high voltage power supply for driving practically any sign from 2-10kV at up to 27mA. Everbrite's proprietary anti-bubbling and anti mercury migration waveforms are also included.

800-0254 / 800-0255 (IEC) Model 3610D
This is a 10kV universal high voltage power supply for driving practically any sign from 2-10kV at up to 27mA. A push button dimming switch selects full bright or roughly half bright settings. Everbrite's proprietary anti-bubbling and anti mercury migration waveforms are also included.

800-0242 / 800-0243 (IEC) Model 3610CVD
This is a 10kV universal high voltage power supply for driving practically any sign from 2-10kV at up to 27mA. A rotory dimming potentiometer selects full bright or adjusts incrementally down to roughly 1/3 bright settings. Everbrite's proprietary anti-bubbling and anti mercury migration waveforms are also included.

NOTE:The (IEC) models have an IEC-320-C14 socket on the end of the power supply, rather than a power cord. This connection is just like a computer or monitor, and can use the same power cord.